Product Introduction
I. Main Uses, Principles, and Applicable Scope
1. Main Uses
The Xrido Environmentally Friendly 600-type Dry Copper Granulator is designed for various types of waste wires, cables, household appliance wires, communication lines, computer wires, etc., that are unsuitable for wire stripping machines. Wires of different sizes can be crushed simultaneously without sorting, achieving dry separation and recycling of various waste wire metals and plastics. It features high production capacity, low power consumption, high sorting rate, single-feed operation with multiple machines working together (crushing, conveying, dust collection, and dry separation), fully automatic intelligent control, requiring only one person for feeding, and an advanced dust collection device. It improves the quality of recycled copper, allows for plastic recycling and reuse, and simultaneously solves environmental pollution problems.
2. Working Principle
Two substances of different densities are deflected by the vibration of a screen surface at a certain angle under the action of wind. The denser copper wire adheres to the screen surface and moves towards the copper outlet, while the less dense plastic sheet floats on top of the copper wire and flows towards the plastic outlet, thus achieving copper-plastic separation. The separation efficiency is directly proportional to the diameter of the single copper wire; the thicker the copper wire, the cleaner the separation from the plastic, and the higher the output per unit time. Conversely, the thinner the copper wire, the worse the separation effect.
3. Scope of Application
Suitable for processing various types of wires and cables, household appliance wires, communication lines, computer cables, and other waste wires that are unsuitable for wire stripping machines.
II. Working Conditions
Voltage 380V±10%, power frequency 50Hz.
III. Main Equipment Composition
The copper granulator mainly consists of five parts: crusher, conveyor, dust collector, fan, and sorter.
IV. Other
1. Provide one set each of the following: equipment instruction manual, tooling diagram, equipment appearance drawing, process diagram, electrical schematic diagram, external wiring diagram, and a list of installation materials specifications and quantities, as well as a list of vulnerable parts.
2. Equipment noise: ≤75db
3. Equipment protection: All transmission and rotating parts are equipped with safety protection devices.
4. The entire machine should be free from oil leakage, air leakage, and electrical leakage.
5. This unit does not use DC motor drive. The selection and power of each drive motor should be appropriate. During long-term (more than 12 hours) continuous operation, the motor heat generation should be within the permissible range (the casing should not be hot to the touch, i.e., the casing temperature should be below 70℃).
6. All limit protection devices are complete and effective.
7. One set each of vulnerable parts and tools.
Get Price
WhatsApp